Halloween Candy Grabber STEM Challenge

A Halloween Candy Grabber is a great STEM challenge for Halloween. Children can investigate by making the grabber shorter and longer or add extra pieces like easy to hold handles or extra grippy bits on the claw part.

I added some teeth and an eye to make my grabber look more Halloween like, but you could make yours much scarier, or just leave out the decorations all together!

If you don’t want to use craft sticks, thick cardboard cut into strips also works well. Cardboard also has the advantage that you can just use a pencil to make the holes for the split pins.

You’ll need

8-12 crafts sticks

Split pins

Drill to make the holes

Double sided tape

Googley eyes and other decorations – optional

How to make a Halloween candy grabber

Step 1

Lay out the craft sticks and ask an adult to help drill a hole into both ends and the centre of each stick.

Step 2

Lay out the craft sticks like the image below, placing the holes over each other.

Step 3

Place a split pin through the centre holes of two craft sticks and check the sticks can move.

Step 4

Use the split pins to attach the sticks to each other like the image below. Keep going until you have at least 6 crafts sticks attached together.

Step 5

Cut one craft stick in half carefully and attach both pieces to one end of the grabber. These can be fixed in place with either a split pin or glued.

The teeth and eye decorations are optional!

Step 7

Test your grabber by pushing the two non decorated ends together, it should extend outwards.

More STEM ideas for Halloween

Try an articulated grabber made with cardboard.

Design an build a spider drawing robot.

Or try one of my other spooky science experiments for Halloween!

Last Updated on October 5, 2022 by Emma Vanstone

The post Halloween Candy Grabber STEM Challenge appeared first on Science Experiments for Kids.

Science Experiments for Kids Read More 

Leave a Reply